Download >>> https://tinurli.com/282yia
Baofeng UV-8D Software Download Download the latest Baofeng UV-8D firmware to get the most out of your handheld radio.1) Download the software from xxxxxx.com/UV-8D_firmware/down_UV_8d.zip to your PC, extract it and copy all files into a folder on your PC. 2) Copy the folder to a microSD card with at least 8GB capacity, or use an external USB flash drive with at least 16GB capacity to load the firmware update files. 3) Insert the microSD card into your Baofeng UV-8D. If the battery is fully discharged, keep it plugged in until the battery is charged. 4) Turn on the Baofeng UV-8D and wait for a few seconds for all programming settings to be loaded. You can check whether your radio is ready by going to Menu>System>System Status>Roger Status>Receiver Ready. If the receiver is ready, the version information should display "V1.00." 5) Press Menu>Programming>Firmware Update, and choose the file "uv_8d_1.10.Tx". This will start the update process. 6) Follow the on-screen prompts to complete the firmware update process. The process takes approximately two minutes, and while it's in progress you'll see a message that says "Programming… Please Wait." Once completed, your UV-8D will reboot automatically and you'll see an indication that the new firmware is running.Note: If it does not reboot automatically, turn off your radio then turn it back on to restart programming mode again. Baofeng UV-8D Firmware Upgrade ProcessThe process to upgrade the Baofeng UV-8D firmware is very simple. You can simply use your USB port or your microSD card slot to copy the firmware file. programming mode must be turned on before updating firmware. This will prevent you from losing any programs already in memory. Baofeng UV-8D Software Download Programming ModeBaofeng Uv-8d Software Upgrade Instructions For Windows 7/Vista/XP/2000/Linux / Windows Vista 32 bit&32 bitMac OS X 10.4 Yerba Menta / Mac OS X 10. 5 Leopard / Mac OS X 10.6 Snow LeopardBaofeng UV-8D Firmware Download Below are the different models of Baofeng Uv 8d Firmware:Software Name: Baofeng UV-8DR V1.00.09.35 FCC Test Report May 18, 2012 Software Name: Baofeng UV-8DR V1.00.08.35 FCC Test Report May 18, 2012 Software Name: Baofeng UV-8DR V1.00.07.40 FCC Test Report May 30, 2012 Software Name: Baofeng UV-8DR V1.00.05. cfa1e77820
Comments